Standard Tanks

Cleito Tank by Aspire has a sub-ohm tank that is more than the sum of its parts. With an all-new coil that replaces the standard chimney and delivers maximized airflow and vapour production. The Cleito is made of stainless steel (304) with a Pyrex glass tube and a wide bore Delrin drip tip, which is made of imported food contact Delrin material.

Box Contents:

1 x Cleito tank

1 x Extra 0.2ohm Clapton Coil

1 x Extra Derlin Drip Tip

1 x rubber band

4 x rubber cuffs

1 x Extra O Ring

1 x User Manual

1 x Warranty Card

K1 tank by Aspire is the latest generation of that utilises the innovative BVC technology. The bottom vertical coil system allows for a longer life expectancy for use. The K1 utilises Pyrex glass and has a polished steel drip tip. The K1 exudes class and performs amazingly giving the vaper a clean taste from their e liquids. This Aspire K1 comes with a 1.8 Ohms resistance coil preinstalled in device.

Features:
Bottom Vertical Coil Technology
Pyrex Glass Tank with glue-free design
Stainless Steel Drip Tip (Compatible with 510 Drip Tips)
1.5 ml Capacity
eGo Compatible
Dimensions: 2-7/8"L x 7/16"D (with drip tip)

Contents:
1 x Aspire K1 Pyrex Glass Glassomizer
1 x 1.8 ohms coils (1 preinstalled in clearomiser)
1 x Stainless Steel Drip tip (Replaceable 510 tip)

The K2 Tank by Aspire is a compact tank designed for mouth to lung vaping. The K2 features a 1.8ml capacity and a 510 connection for compatibility with almost any device currently available.

The K2 Tank is compatible with Aspire BVC General Replacement coils.

Box Contents:

• 1 x Aspire K2 Tank
• 1 x Aspire 1.6 Ohm BVC Kanthal Atomizer Coil (Pre-installed)
• 1 x Replaceable 510 Drip Tip (Pre-Fitted)
• 1 x Filling & Coil Change Guide

K3 Tank by Aspire utilises Aspire's famous Nautilus BVC coils for long atomizer life and rich, full flavour. With an acid-resistant Pyrex glass tank, replaceable 510 drip-tip and a 2ml e-liquid capacity, the K3 Tank sets the new standard for mouth-to-lung (MTL) vaping.

Specification:

2ml e-liquid capacity
Regular 510 battery screw connector
Compatible with any low/mid power 510 battery
Pyrex tank glass
Bottom fill
Pre-set airflow (MTL)
Dimensions 55mm x 18mm

Box Contents:
1 x Aspire K3 Tank
1 x Aspire 1.8 Ohm Nautilus BVC Atomizer Coil (Pre-installed)
1 x Stainless Steel 510 Drip Tip (Pre-Fitted)
1 x Filling & Coil Change Manual

Nautilus 2S Tank by Aspire is a sleek, curvy design equipped with a 0.4ohm BVC coil for direct to lung vaping and a 1.8ohm BVC coil for mouth to lung vaping. Top-fill child-resistant design with a silicone self-seal keeps things clean, and as the coils are interchangeable with other Nautilus coils, it allows you to personalise your draw/vapour preference.

Box Contents:

• 1 x Nautilus 2S tank (Pre-installed a 1.8ohm coil)
• 1 x Extra drip tip
• 1 x 0.4ohm BVC coil
• 10 x O rings 
• 1 x warranty card
• 1 x user manual

The Eleaf MELO 5 e-cig tank features a ‘dual lock’ system. With a child-resistant lift and slide refill mechanism to make the tank secure and a new bottom lock to help keep e-liquid inside whilst changing atomizer heads, the MELO 5 makes sub-ohm vaping easy.

Fully adjustable airflow allows the vaping experience to be customised to personal preference, whilst the EC-S 0.6ohm mesh atomizer head can produce flavourful clouds of vapour thanks to the larger surface area of the mesh coil housed within.

The MELO 5 would be a good match to existing vapers who require more vapour than regular e-cig tanks can offer. The bottom lock system makes changing atomizers easy and mess-free, while the lift and slide top fill allow for fast top-ups when out and about.

Product highlights

• Child-resistant lift and slide refill system
• Bottom lock mechanism to prevent e-liquid spillage
• Uses the EC-S 0.6ohm mesh atomizer.

Specifications

• Tank capacity - 2ml
• Coil resistance - EC-M 0.15ohm / EC-S 0.6ohm
• Dimensions - 57.3mm x 26.5mm (dia.)

Kit Contents

• 1 x MELO 5 tank
• 2 x EC coils
• 1 x Warning card
• 1 x User manual.

GO s tank by Innokin is not just a replacement for the Innokin GO s Pen vape kit, it is a reliable disposable vape tank. Capable of holding up to 2ml of e-liquid, this tank produces a discreet amount of vapour, to support mouth to lung vaping.

Specifications:

• Disposable Vape Tank
• 2ml E-Liquid Capacity
• Sliding Top-Fill Cap
• Adjustable Airflow
• 1.7 Ohm Coil Pre-Installed
• Suited To High PG E-Liquids

Disposable models like this are popular as they don't require the regular maintenance of a standard tank. When the coil is no longer usable, simply replace the tank exactly as you would with a refillable pod. This tank can be refilled multiple times and features a sliding top-fill cap for quicker and cleaner top-ups of e-liquid.

When it comes to pairing the GO S with e-liquid, you’ll have plenty of options available to you. For best results, we'd recommend an e-liquid that’s 50% PG or higher, to better support the pe-installed 1.7 Ohm coil. To further customise performance, you can use the adjustable airflow to further control vapour production for a tight or loose inhale.

Box Contents:

• Innokin GO s 2ml Disposable Vape Tank (1.7 Ohm Coil Pre-Installed)

One of the best additions to the already impressive line up of the Innokin tanks, the Innokin Slipstream tank is a sub-ohm beast with a 2ml capacity and a reduced chamber. The addition of the reduced chamber greatly improves indirect airflow and boosts flavour, creating a rounded, tasty vaping experience.

The Innokin Slipstream tank is made from superior stainless steel and Pyrex glass, thoroughly protected by SS to avoid accidental breakage. Two windows on the side allow you to easily check your vape juice levels at any time. The Slipstream tank features a top-fill with a push cap that’s completely childproof, which also allows you to swap out coils easily and without the mess.

Adjustable top airflow and a wide bore Delrin drip tip also make an appearance, making this one of the best small sub-ohm tanks currently on the market. You can get your Innokin Slipstream tank right here – black and silver versions available!

The Exceed D22 tank suits a wide range of e-cig batteries and utilises EX atomizers. It comes with a 0.5ohm and a 1.2ohm resistance atomizer meaning it will perform brilliantly as either a mouth to lung or direct inhale tank depending on which one is fitted. This tailored experience is enhanced thanks to the tank’s refined airflow.

Who is it for?

This is for vapers who like great flavour and for those who like to switch between vaping styles without having to swap tanks.

Why should they buy?

It is a sturdy tank which can be paired with almost any e-cig battery. Customers can experience two contrasting vaping styles within the same tank and it will perform well in a range of output modes. Screw top filling adds convenience to this tank’s list of impressive features.

Kitted with the CS coils, this tank is designed for reliability and appeals to the masses. The CS Air 2 Tank will perform well with low to moderate powered e-cig batteries and adjustable airflow allows vapers to tailor their experience.

Who is it for?

It is perfect for new vapers, regular vapers and smokers. The tank is very simple to use and is a great match to a variety of batteries so will suit the needs of the majority of customers.

Why should they buy?

In terms of both design and performance, it’s a great partner for many different types of batteries and mods. The CS range of coils is one of the most popular atomizer ranges on the market thanks to their impressive reliability. Bottom filling means e-liquid can be topped up and atomizers can be changed conveniently even when e-liquid is already in the tank.

Part of the world renowned TECC range, the arc Slim utilises the popular CS coils making it suitable for all vapers and a great match for the majority of e-cig batteries.

Who is it for?

The TECC arc Slim Tank will appeal to regular vapers, new vapers and smokers. It is more suited to mouth to lung vapers using a low to moderate power.

Why should they buy?

The tank’s CS coils are some of the most popular on the market thanks to their reliability. This combined with a solid surround and accurate airflow control the CS Air Slim is a great all-round tank at a good price. The go-to tank for your every day vaper or a smoker looking to switch to vaping.

Utilising the popular CS 1.5 coils, the CS Micro Tank provides reliability, simplicity and good performance to the regular or new vaper. A great partner for variable wattage devices and with a wider diameter than most of the other tanks in the CS range.

Who is it for?

New vapers, regular vapers and smokers. This tank will appeal to customers who like CS coils and prefer a chunkier tank than the CS Air range.

Why should they buy?

CS coils are renowned for reliability and compliment a low to moderate power battery perfectly. Adjustable airflow allows vapers to tailor their experience and makes this tank a great companion for variable wattage batteries or mods.

The Slider CS Air Tank is the first of the CS Tanks to feature sliding top fill. The CS coils are renowned for reliability and this sliding top-fill mechanism is what a lot of vapers have been crying out for. The Slider CS Air is the perfect companion to a wide range of mods and batteries as it has the ability to drive sub-ohm coils as well as the higher resistance coils it is kitted with. 

Who is it for?

This tank will appeal to the huge customer base who love CS coils but want a more convenient way of refilling. It’s perfect for both new vapers and smokers looking to make the switch as well as experienced vapers as it can use the new CS-M 0.35ohm coil (sold separately) for larger clouds and use at higher power.

Why should they buy?

This tank can meet the needs of both vapers who require a good value tank which is easy to use and vapers who want the reliability of CS coils in a convenient, sliding top-fill package. With bottom airflow control, sliding top fill and CS coils, this is a great all-round tank for all types of vapers.