Coils

Aegis replacement Pods by GeekVape is specially designed for Geekvape Aegis Pod Kit. The Geekvape Aegis Pod Cartridge comes with replaceable coil system, so you are capable of replacing the 0.6ohm coil with it.

Geekvape Aegis Pod Cartridge is definitely your best choice.

Coil is not included

Aspire is shaping the ecig industry with its fantastic coil technology. The Aspire Atlantis 2 replacement coils are made using organic cotton and are for sub-ohm vaping. 

Available in 0.3 ohm (70-80W), 0.5 ohm (20-30W) & 1.0 ohm (40-50W).

The Atlantis V2 coils are compatible with both the Atlantis range and the Triton range, although if using on an Atlantis V1 we recommend sticking with the 0.5 ohm.

Please note: 0.3 ohm is not suitable for the original Aspire Atlantis Tank.

Aspire Atlantis EVO Coils, have been designed to be used with the Atlantis EVO Tank. These are sub-ohm coils, available in both 0.4 Ohms and 0.5 Ohms they provide improved airflow and taste, with the 0.4 performing best between 40 - 50W and the 0.5 performing best between 35 - 40W.

While originally intended for use with the Aspire Evo Tank, these vape coils are also compatible with a range of Aspire vape tanks, including the Aspire Atlantis, Aspire Atlantis 2, Aspire Triton and Aspire Triton 2.

Pack of 2 replacement pods for the Aspire AVP.

The 2ml capacity pod is held in place into the main body of the AVP with magnets, and the 1.2ohm coil is set/fixed into the bottom fill pod, which is not replaceable/removable.

Pre installed, non replaceable 1.2ohm Ni-Chrome coil.  With the coil being Ni-Chrome this will enhance battery life as it doesn’t need the ramp up time that a standard kanthal coil does.

The Aspire BP replacement coils in 0.17ohm and 0.6ohm are for use with the Aspire BP60 Pod Kit and BP80 Pod Kit. There is also a 0.3ohm option that is incompatible with the Aspire BP60. These coils are perfect for sub-ohm vaping.

KEY FEATURES:

• Excellent longevity thanks to quality construction
• Ideal for sub-ohm vaping
• 0.3ohm mesh design / 0.6ohm dual wire build.

The Aspire Breeze 2 coils are meant to be used with  pod-style mod. These coils are specifically designed for nic salts and they definitely get the job done! Using the Aspire U-Tech “U” shaped airflow, you’ll be able to stealthily vape without sacrificing flavour.

Each pack comes with 5 x 1.0 ohm coils, so you’ll have plenty to keep your game of hiding and puff going!

Optimised for robust flavour recreation in smaller devices. The structure design of the coil features a top-airflow intake that travels down through the vertical spacing of the coil, then passes up through the other air-slot for a U-formation.

It is constructed with superior stainless steel encasing the core of Kanthal heating elements and organic cotton.

The Aspire BVC Coils (bottom vertical coil) is a new and improved design mastered by Aspire. Lasting longer and producing the most vapour clouds, this is the most satisfying sensation available for regular vapers.

If you’ve already had an Aspire tank, this is the next step in making the most from your experience, as you can quite simply just switch the coils. Keep your vaping journey going with these great value Aspire coils.

A replacement pack of 1 coil for the Aspire Cleito 120 tank. These Aspire Cleito 120 coils can handle up to 160 watts of power and are available in 0.16ohm & 0.15 Mesh resistance.
The Cleito 120 Coils are only compatible with the Cleito 120 Tank, and cannot be used with the original Cleito.

0.16 (100-120W)

0.15 Mesh (120-160W)

Aspire Cleito EXO Replacement coils, these coils are designed for maximum flavour and vapour production by replacing the traditional static chimney found in most e-cig tanks.

0.16 (60-100W)

The latest addition to the Cleito coil family was introduced with the Cleito PRO tank.

Aspire Cleito replacement coils for the Cleito, The Cleito EXO & The Cleito Pro Tanks.

So if you own any of the tanks above take your vape to the next level as the all-new 0.5ohm coil runs 60 - 80 watts and delivers great flavour.

The internals of the coil has been reworked as well to wick easier and prevent dry hits.

The Aspire Flexus (AF) coils are designed for specific use with the Aspire Flexus replacement pods. These coils are available in two variants; a 0.6 Ohm mesh or a 1.0 Ohm Mesh coil.

Features:

• Flexus Coils
  
• Mesh Design
  
• MTL or RDTL Vaping

The 0.6 Ohm coil features a mesh coil build, allowing faster heating of e-liquid for clearer flavour and larger cloud production, whilst the standard 1.0 Ohm coil is ideal for those who prefer more discreet cloud creation.

0.6ohm Wattage Range: 15-18w
1.0ohm Wattage Range: 12-15w

Contains:

• 5 x Aspire AF 0.6 Ohm / 1.0 Ohm Replacement Coils.

Aspire has upgraded their flagship Nautilus BVC coils for the Nautilus 2S tank! They will be a welcome upgrade to your vape game!

The traditional e-juice coil for direct to lung vaping is rated for 0.4Ω (23-28w). Best for vapers that love to vape DTL and enjoy their lower nicotine e-juice! You have the added benefit of Aspire’s compatibility promise. Use these BVC coils with any of the Nautilus tanks you have in your collection!

The Aspire Odan replacement coils have been designed for use with the Aspire Odan Tank and should be paired with high VG e-liquid, that is 60% VG or higher.

Featuring specialist wicks, the Odan vape coils feature a combination wick, that utilises linen and organic cotton. These wicks are heat resistant and are suited to both mid-wattage and high-wattage vaping.

0.2 Ohm: 50 – 60W

0.3 Ohm: 35-45W.

Revvo Coils by Aspire. The Revolutionary ARC (Aspire Radial Coil) that powers the amazing Aspire Revvo Tank.

Rated at 0.10ohm - 0.16ohm with the wide surface area for effective wicking and amazing flavour production.  The ARC Revvo coils are supplied in packs of 3 for your convenience at a fantastic value.

The coil is a basic part of the ACE vape that plays an important role in its powerful sub-ohm performance. Working in perfect synergy with the mouthpiece and airflow design, it guarantees leak-free usage and rich flavour delivery.

The blu AC Atomiser Heads allows you to fill your device with a wide range of blu Liquids. Simple to fill and easy to use, you will spend less time refilling.

You will receive: 

5x blu ACE Atomiser Heads 0.6 Ohm*

*Please note Blue Ace coils have been discontinued and have been replaced with the joyetech coils.

Only compatible with the latest blu ACE device.

Designed mainly for flavour, Eleaf GS Air Coil Atomiser Heads operate at low to mid power variable wattage settings. GS Air coils come pre-fitted and packaged with a wide range of Eleaf starter kits and atomisers

While the GS Air coil range focuses mainly on mouth-to-lung (MTL) vaping styles, some vapers turn up the wattage and increase the airflow for a relaxed, direct-lung inhale. Whichever vape style you choose, GS Air coils offer great performance, with the added benefits of reduced e juice and battery power consumption.

There are currently three different resistances on offer in the GS coil range. All GS coils feature Kanthal coil wire and flavour enhancing, organic cotton wicks. The 1.5 Ohm coil features dual, parallel wound coil wire for a superbly satisfying mouth-to-lung vape.

Choose your preferred GS Air coil format from one of these options:


Eleaf GS Air 0.75 Ohm Coil Features:
Screw-in, replacement GS Air coil with a resistance of 0.75 Ohms
Designed for use with GS Air, GS Air-M, and GS Tanks
Features single Kanthal coil wire (not suitable for temperature control modes)
Traditional Stainless Steel, vertical coil format
Rated to fire between 8 & 25 Watts
Coil wrapped in a pure, organic cotton wick
Great flavour for an MTL or tight direct lung inhale
100% genuine replacement Eleaf coil


Eleaf GS Air 1.2 Ohm Coil Features:
Replacement, screw-fitted GS Air coil with a resistance of 1.2 Ohms
Suitable for use with GS Air, GS Air-M, and GS Tanks
Single Kanthal coil wire core (not compatible with temperature control modes)
Stainless Steel barrel, vertical coil format
Rated to fire between 8 & 30 Watts
Flavour enhancing, organic cotton wick
Capable of firing at a slightly higher wattage
100% authentic replacement Eleaf coil


Eleaf GS Air 1.5 Ohm Coil Features:
Screw-in low wattage GS Air coil with a resistance of 1.5 Ohms
Manufactured for use with Eleaf’s GS Air, GS Air-M, and GS Tanks
2 x parallel Kanthal coil wires (not compatible with temperature control modes)
Vertical coil format in a compact, Stainless Steel barrel
Rated to fire between 8 & 20 Watts
Wicked with pure organic cotton
Great flavour from a dual, parallel coil core
100% genuine Eleaf coil

Eleaf GS Air 0.35 Ohm Coil
The 0.35ohm coils are mesh, the first GS atomiser head to utilise this technology. It provides a sub-ohm coil, with large surface area. This means great clouds of vapour and outstanding flavour

The GT coils are designed for simplicity. They use a push-fit mechanism making the process of changing the coil both cleaner and easier.

With the option of a GT M 0.6ohm mesh coil or a 1.2ohm coil, both vapers who prefer larger clouds and those who prefer a restricted draw are catered for.

The Eleaf GX Atomiser is available in a range of resistances. They have a mesh build that heats your e-liquid more evenly and quickly. When paired with the GX Tank, these coils can heat your e-liquid in just 0.001 seconds. These coils have been upgraded to deliver intense flavour and dense vapour.

4 x Coils
Compatible with GX Tank
Push-fit design

The 0.2ohm coil works best at 50-80W and the 0.5ohm coil reaches its full potential at 25-45W.

Both coils have been made with mesh to heat your e-liquid quickly and evenly and are great withshortfill e-liquids to produce large clouds of vapour. They can also be used with 50/50 e-liquid for a balance of flavour, vapour and throat hit.

The Eleaf GZ atomizer heads offer a great flavour experience. Compatible with the GZeno tank and iStick P100, the GZ atomizer heads are push-fit for simple coil changes.

The 1.2ohm resistance makes this atomizer head ideal for MTL vaping using a wide variety of vape liquids including nic salts. The 0.4ohm is a Half-DL coil ideal for vapers wanting to try something in between, can be used with a broad range of liquids for great flavour.

ELEAF ELLO HW REPLACEMENT COILS

Replacement coils for the Eleaf Ello Tank.

CHOICE OF COIL
You can choose from the following specification of replacement coil:

• HW1- 0.2ohms - Single Cylinder for use at 40-80w

• HW2 - 0.3ohms - Dual Cylinder for use at 30-70w

• HW3 - 0.2ohms - Triple Cylinder for use at 50-130w

• HW4 - 0.3ohms - Quad Cylinder for use at 40-110w
  

• HW1-C 0.25ohm - Single Cylinder for use at 20-50W

COMPATIBILITY
HW1/HW2/HW3/HW4 coils work with the following tanks

• Pico 25 kit

• Ikonn kit

• Ello tank

The sub-ohm HW-N and HW-M atomizer heads are great for vapers who like to directly inhale and create large clouds of vapour thanks to their mesh coils.

HW-M 0.15ohm (50-100W)

HW-N 0.2ohm (40-90W)

The IC Atomizer Head is a new replacement atomizer head for the iCare series of vape kits. It consists of a single coil atomizer which is tiny in size. Small yet efficient, this 1.1ohm atomizer head is able to deliver a satisfying amount of vapour with good flavour. Designed for use with high PG e-liquids.

Technical Details:
1.1ohm resistance (for high PG eliquids)

Compatible with both the Freemax Fireluke Mesh tank and the Freemax Mesh Pro tank, these coil options provide a new and improved wicking system along with new double and triple mesh coils. 

These coils are designed to provide a top tier vaping experience, with high volume vapour production and incredible flavour with every puff. You'll get more puffs out of them too, as the new wicking system keeps the cotton from drying out, ensuring greater longevity.

Specifications:

• Kanthal Single Mesh - 0.15ohm (40 - 70W)
• SS316L Single Mesh - 0.12ohm (400°F - 550°F TC)
• Kanthal Double Mesh - 0.2ohm (60-90W)
• Kanthal Triple Mesh - 0.15ohm (80 - 110W)

The FreeMax M Pro 2 Coils are an innovative product which has been designed for the ultimate flavour. They are compatible with the FreeMax Mesh Pro Tank which can endure a longer life span, compared to normal sub ohm coils. Flax and normal cotton feature within these coils.

These coils can be set to a higher wattage and produce larger clouds, ideal for all the vapers who enjoy sub-ohming.

Compatible with the following FreeMax products:

• M Pro Tank
• M Pro 2 Tank

The box comes with a scratch sticker so you can check the authenticity of this item.

FreeMax coils in this series:

• 904L M1 – 0.15Ω Ohm – 40-60W, best 65W (mesh)
• 904L M2 – 0.2Ω Ohm – 60-90W, best 80W (mesh)
• 904L M3 – 0.15Ω Ohm – 80-110W, best 100W (mesh)
• 904L M4 – 0.15Ω Ohm – 70-110W, best 95W (mesh)

The Fireluke M Twister coils are compatible with the Fireluke 2 Tank and Freemax Twister Kit. Designed for sub ohm vaping, these coils work best with high VG e-liquids that are 60% VG and higher.

Each variant features a mesh coil build, mesh has a larger surface area overall for faster heating and a reduced chance of hot spots. The TX coils use specially crafted tea cotton fibre wicks. These wicks absorb more eliquid and are 100% organic for a cleaner taste.

The coil types available, are the following:

The TX1 Mesh coils use a single Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 40 - 90W.

The TX3 Mesh coils have a triple Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 50 - 90W.

The TX4 Mesh coils utilise a quadruple Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 40 - 80W.

The TX1 SS316L coils use a Stainless Steel mesh coil build, meaning this coil can be used in Temperature Control and Variable Wattage mode. Registering a 0.12 Ohm resistance and can be used up to 60W.

The TNX2 coils feature a dual Kanthal mesh coil build. Registering a 0.5 Ohm resistance, these coils can be used between 20 - 50W.

The X1 coils feature a 0.15 Ohm resistance and utilise a single Kanthal mesh coil build. These coils should be used between 40 - 90W.

The X2 uses dual Kanthal mesh builds and registers a 0.2 Ohm resistance. These coils should be used between 40 - 80W.

The X3 has three Kanthal mesh coil builds and features a 0.15 Ohm resistance. These coils should be used between 50 - 90W